如果您在選擇探頭上有任何疑問(wèn)，歡迎聯(lián)系我們-增宜檢測(cè)技術(shù)（上海）有限公司，我們資深的探頭工程師一定能幫您找出適合您的探頭。
| Display Name | UPC Code | Description |
| Q3300971 | 0.5L64-96X22-I5-P-5-OM | |
| U8840160 | 0320806 | 4 mil Shim Samples (set of 2) |
| U8779068 | 0321004 | Thickness Gage assortment. 5 in. long 13 sizes between .001 Inch and .030 Inch |
| Q2501090 | 10-006806-00 | |
| U8990444 | 1823234 | "V-notch" collar to aid in holding probe on rounded surface. For use with "P/X-X/X" series. |
| U8250005 | 18BE0007 | Teflon tape, 0.002 inch thick x 1/4 inch wide (36 yards) |
| Q3300970 | 1L64-96X22-I5-P-5-OM | |
| U8779668 | 28GA5208 | Gel sheet 12'' x 12'' x 0.5'' |
| U8901365 | 3303965 | Teflon Tape - 1/4 in. |
| U8901366 | 3304920 | Roll of Teflon Tape (1 in.) |
| U8330711 | 7.5L16-4.96X5-A00-P-2.5-OM | Standard Phased Array Probe, 7.5 MHz Linear Array, 16 Elements, 4.96x5 mm Total Active Aperture, 0.31 mm Pitch, 5 mm Elevation, A00 Case Type, Impedance Matching to Rexolite, PVC Sheathing, 2.5 m Cable Length, Omniscan Connector |
| U8800041 | 9102894 | Cable, 6 foot length, BNC to Microdot cable |
| U8800048 | 9113016 | "Cable, 6 foot length, Bridge coil configuration for probes with Fischer/Lemo Triaxial connector to NDT-19, NDT-24 instruments with 8 Pin Burndy connector. Model: C/SC/6" |
| U8800050 | 9113429 | Cable, 6 foot length, Reflection coil configuration for probes with Fischer/Lemo Triaxial connector to 8 Pin Burndy (CR/SC/6) |
| U8800053 | 9116184 | Cable, 8 foot (2.4 Meter) length, 8 pin Burndy connector to dual microdot connector. Used to connect adjustable sliding probes to the NDT-19 and NDT-24 series instruments, reflection coil configuration. |
| U8800058 | 9117789 | BondMaster cable - SBM-CPM-P11 11 pin to 11 pin cable used on Pitch Catch and MIA probes |
| U8800059 | 9117790 | BondMaster cable - SBM-CR-P6 11 pin to 6 pin cable used on Resonance probes. |
| U8800062 | 9118328 | Cable 6 foot length, Reflection coil configuration probes with Triax Fischer/Lemo to Elotest 8 Pin Fischer. |
| U8800063 | 9118388 | |
| U8800064 | 9118630 | |
| U8800073 | 9122083 | Cable, 6 foot length, PowerLink Bridge/Reflection Cable for probes with 7 Pin Lemo to 16 Pin Lemo to connect to N1000, N2000 , N500 ro N600 series instruments. (CL/SC/6) |
| U8800075 | 9122089 | Scanner Cable, 8 foot 6 inch length, MiniMite, RA 2000 and Spitfire 2000 to Nortec 2000/3000 and Nortec 500S/D - right angle |
| U8800076 | 9122090 | Scanner Cable, 8 foot 6 inch length, MiniMite, RA 2000, Spitfire 2000 and PS-5AL to Nortec 2000, Nortec 500S/D Scanner cable. (Requires modification to PS-5) |
| U8800082 | 9122200 | Cable, 6 foot length, Bridge coil configuration for probes with Fischer/Lemo Triaxial connector to 12 Pin Lemo (Hocking Phasec 2200) |
| U8779012 | 9122205 | SPO-2182 DUAL MD REFLECTION TO ELOTEST |
| U8800658 | 9122207 | CR/SC/6 Phasec 2200 |
| U8800086 | 9122229 | Universal Battery Charger (UBC) to Li-Ion instrument cable - Nortec 2000S+, Nortec 2000D+ or B1000e+ |
| U8800087 | 9122230 | Universal Battery Charger (UBC) to Ni-MH instrument cable - Nortec 1000/2000 series or BM1000 |
| U8800091 | 9122244 | Cable, 6 foot length, Bridge coil configuration, 16 Pin Lemo to Fischer/Lemo Triax (SPO-6472) |
| U8600344 | 9122245 | Cable, 6 foot length, Bridge coil configuration for probes with Fischer/Lemo Triaxial connector to 4 Pin Fisher connector, for use with MIZ21 (C/SC/6 MIZ21) |
| U8800095 | 9122267 | Cable, 6 foot length, Reflection coil configuration probes with 4 Pin Fischer connector to Nortec 500, 600 and 2000 series instruments with 16 Pin LEMO. Model: SPO-6388 |
| U8779079 | 9122348 | "Cable, 6 foot length, 4pin Fischer (MIZ21) to PowerLink Bridge coil configuration probe. Model: F4-L7-B-6" |
| U8800744 | 9122354 | "Cable 30 foot length, PowerLink Bridge/Reflection Cable for probes with 7 Pin Lemo to 16 Pin Lemo to connect to N1000, N2000, N500 or N600 series instruments. Model: CL/SC/30" |
| U8800878 | 9122360 | Scanner Cable, 16PL-12PL Hocking Mini-Rotor Scanner cable for use with N500 or N600. |
| U8801134 | 9122390 | Cable 6 foot length, bridge coil configuration probes with 7 pin Lemo connector to Phasec instrument (12 pin Lemo). This item supersedes P/N CH22-7L-6. |
| Q2500080 | 9122405 | |
| U8629041 | 9204413 | |
| U8623148 | 9213013 | Pencil Absolute Shielded Metal Detachable Pencil Probe. Operates on a 100KHz-500KHz frequency range. Right angle shaft with a 0.50" drop. Total length of 6 inches. (Right Angle Pencil Probe) |
| U8623153 | 9213403 | |
| U8623154 | 9213404 | |
| U8623159 | 9213409 | Nortec Standard Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 1MHz- 2MHz (P/1Mhz-2Mhz/A) |
| U8623170 | 9213420 | |
| U8623173 | 9213423 | |
| U8623001 | 9213546 | Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 5 kHz - 100 kHz (equivalent to SPO-2132), Triax Fischer/LEMO Connector |
| U8623002 | 9213547 | Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .44 in. (11.2 mm) and a operating range of 500 Hz - 40 kHz (equivalent to SPO-1402, SPO-1391), Triax Fischer/LEMO Connector |
| U8623005 | 9213550 | Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 2 kHz - 200 kHz (equivalent to APR/7/S, SPO-2404), Triax Fischer/LEMO Connector |
| U8623006 | 9213551 | Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 700 Hz - 80 kHz (equivalent to APR/8/S, SPO-2026), Triax Fischer/LEMO Connector |
| U8623007 | 9213552.01 | Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .44 in. (11.2 mm) and a operating range of 500 Hz - 60 kHz (equivalent to APBK/10.5/S, SPO-2025), Triax Fischer/LEMO Connector |
| U8623008 | 9213553 | Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .50 in. (12.7 mm) and a operating range of 300 Hz - 40 kHz (equivalent to APB/12.5/S, SPO-2136), Triax Fischer/LEMO Connector |
| U8623009 | 9213554 | Surface Probe, Standard Reflection Detachable Surface Probe with a diameter of .62 in. (15.7 mm) and a operating range of 100 Hz - 20 kHz (equivalent to APG/16/S. SPO-2134), Triax Fischer/LEMO Connector |
| U8602004 | 9216156 | |
| U8623178 | 9216191 | Pencil Absolute Shielded Metal Detachable Pencil Probe. Operates on a 100KHz-500KHz frequency range. Straight through shaft. Total length of 4 inches. (P/100Khz-500Khz/A/0.0/4) |
| U8623214 | 9216216 | Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 50kHz -100kHz, triax Fischer/LEMO connector, unshielded bridge coil configuration. Model: P/50Khz-100Khz/AU/90.50/6 |
| U8623189 | 9216220 | Pencil Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Right angle shaft with a 0.50" drop. Total length of 6 inches. (P/50Khz-100Khz/A/90.5/6) |
| U8623011 | 9216541 | Surface Probe, Standard Bridge Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 100 kHz - 500 kHz, Triax Fischer/LEMO Connector |
| U8670037 | 9216633 | |
| U8614091 | 9217153 | Rotating Scanner Probe, SPO-3564, Probe Diameter 0.187 in. - 0.218 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564 .187-.218) |
| U8614092 | 9217154 | Rotating Scanner Probe, SPO-3564, Probe Diameter 0.218 in. - 0.250 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564) |
| U8614093 | 9217155 | Rotating Scanner Probe, SPO-3564, Probe Diameter 0.250 in. - 0.281 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564) |
| U8614094 | 9217156 | Rotating Scanner Probe, SPO-3564, Probe Diameter 0.281 in. - 0.312 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564) |
| U8614095 | 9217157 | Rotating Scanner Probe, SPO-3564, Probe Diameter 0.312 in. - 0.375 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564) |
| U8614096 | 9217158 | Rotating Scanner Probe, SPO-Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564), .375 -.437 1.5 in WL |
| U8614097 | 9217159 | Rotating Scanner Probe, SPO-3564, Probe Diameter 0.437 in. - 0.500 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564) |
| U8614098 | 9217160 | Rotating Scanner Probe, SPO-3564, Probe Diameter 0.500 in. - 0.562 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (PO-3564) |
| U8633003 | 9217891 | SPO-5330 SR/100Hz-20Khz/.62 |
| U8633004 | 9217896 | Low frequency detachable shielded "reflection" surface probe, 5/16 inch (7.9 mm) diameter x 2 in. (5.08 mm) tall. Operates between 700 Hz and 80 kHz with Triax Fischer/ Lemo connector. SPO-5327 SR/700HZ-80KHZ/.31 |
| U8633005 | 9218108 | SPO-5328 Spot Probe, 500 Hz to 60 kHz, Corrosion Probe, 11.2 mm (0.44 in.) diameter, Triax Fischer/LEMO Connector |
| U8629128 | 9218203 | SPO-5329 300Hz-40KHz .50 |
| U8629537 | 9218204 | SPO-5326 2KHz-200Khz/.25 Special Purpose Corrosion Probe Designed for use on Aluminum structures |
| U8690014 | 9218430 | SPO-1958 Sliding Probe with Elotest Cable |
| U8629543 | 9218631 | |
| U8614101 | 9218787 | Rotating Scanner Probe, SPO-3564, Probe Diameter 0.687 in. - 0.750 in., Working Length 1.5 in. (38 mm), Operates 500 kHz - 3 MHz (SPO-3564) |
| U8610230 | 9219978 | Universal Rotary Hole Probe 0.375 inch (9.5mm) to 0.437 inch (11.0mm) diameter, Self Expanding 2 inch (50 mm) working length. Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .375-.437) |
| U8610231 | 9219979 | Universal Rotary Hole Probe 0.187 inch (4.7mm) to 0.218 inch (5.5mm) diameter, Self Expanding 1.75 inch (44 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .187-.218) |
| U8610232 | 9219980 | Universal Rotary Hole Probe 0.218 inch (5.5 mm) to 0.250 inch (6.3mm) diameter, Self expanding 2.00 inch(50 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration(SPO-5965 .218 - .250) |
| U8610233 | 9219981 | Universal Rotary Hole Probe 0.250 inch (6.3 mm) to 0.281 inch (7.1mm) diameter, Self expanding 2.00 inch(50 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration(SPO-5965 .250 - .281) |
| U8610234 | 9219982 | Universal Rotary Hole Probe 0.281 inch (7.3 mm) to 0.312 inch (7.9 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration(SPO-5965 .281-.312) |
| U8610235 | 9219983 | Universal Rotary Hole Probe 0.312 inch (7.9 mm) to 0.375 inch (9.5 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .312-.375) |
| U8610236 | 9219984 | Universal Rotary Hole Probe 0.437 inch (11 mm) to 0.500 inch (12.6 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .437-.500) |
| U8610237 | 9219985 | Universal Rotary Hole Probe 0.500 inch (12.6 mm) to 0.562 inch (14.2 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .500-.562) |
| U8610238 | 9219987 | Universal rotary hole probe 0.250 inch (6.3mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 1/4 2IN WL |
| U8610239 | 9219988 | Universal rotary hole probe 0.281 inch (7.1mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 9/32 2IN W/L |
| U8610250 | 9219999 | Universal rotary hole probe 0.156 inch (3.9mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 5/32 2IN W/L |
| U8610251 | 9220000 | Universal rotary hole probe 0.187 inch (4.7mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 3/16 2IN W/L |
| U8626003 | 9222160 | Surface Probe, Powerlink Standard Relfection Detachable Surface Probe with a diameter of .62 in. (15.7 mm) and a operating range of 100 Hz - 20 kHz (equivalent to APG/16/S, SPO-2134), 7-pin LEMO Powerlink Connector |
| U8626004 | 9222161 | Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 1 kHz - 50 kHz (equivalent to SPO-1284, SPO-1598), 7-pin LEMO Powerlink Connector |
| U8626024 | 9222162 | Nortec Powerlink Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 500KHz- 1MHz (PL/500KHZ-1MHZ/A) |
| U8626025 | 9222163 | Nortec Powerlink Detachable Pencil Probe. Detachable reflection Differential Shielded with a frequency range of 500KHz- 3MHz (PRL/500Khz-3Mhz/D) |
| U8616094 | 9222165 | Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Straight through shaft . Total length of 4 inches. (ML/50Khz-100Khz/A/0.0/4) |
| U8626027 | 9222180 | Nortec Powerlink Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 100KHz- 500KHz (PL/100Khz-500Khz/A) |
| U8626028 | 9222181 | Nortec Powerlink Detachable Pencil Probe. Detachable Absolute Shielded with a frequency range of 1MHz- 2MHz (PL/1Mhz-2Mhz/A) |
| U8626029 | 9222184 | Nortec Powerlink Detachable Pencil Probe. Detachable Differential Shielded with a frequency range of 500KHz- 2MHz (PL/500Khz-2Mhz/D) |
| U8626006 | 9222193 | Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .62 in. (15.7 mm) and a operating range of 300 Hz - 10 kHz (equivalent to SPO-565, SPO-1125), 7-pin LEMO Powerlink Connector |
| U8626007 | 9222196 | Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .25 in.(6.3 mm) and a operating range of 5 kHz - 100 kHz (equivalent to SPO-1284, SPO-1598), 7-pin LEMO Powerlink Connector |
| U8626010 | 9222200 | Surface Probe, Powerlink Standard Relfection Detachable Surface Probe with a diameter of .31 in. (7.9 mm) and a operating range of 700 Hz - 80kHz (equivalent to APR/8/S, SPO-2026), 7-pin LEMO Powerlink Connector |
| U8626011 | 9222201 | Surface Probe, Powerlink Standard Relfection Detachable Surface Probe with a diameter of .25 in. (6.3 mm) and a operating range of 2 kHz - 200 kHz (equivalent to APR/7/S, SPO-2404), 7-pin LEMO Powerlink Connector |
| U8616095 | 9222202 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink". Operates on a 100KHz-500KHz frequency range. Straight through shaft . Total length of 4 inches. (ML/100Khz-500Khz/A/0.0/4) |
| U8616096 | 9222204 | Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 100KHz-500KHz frequency range. Right angle shaft with a 0.03" drop. Total length of 6 inches. (ML/100Khz-500Khz/A/90.03/6) |
| U8616099 | 9222207 | Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 500KHz-1MHz frequency range. Right angle shaft with a 0.25" drop. Total length of 6 inches. (ML/500Khz-1Mhz/A/90.25/6) |
| U8626047 | 9222209 | |
| U8616102 | 9222214 | Reflection Absolute Shielded Metal Detachable Pencil Probe. Operates on a 500KHz-2MHz frequency range. Right angle shaft with a 0.25" drop. Total length of 6 inches.(MRL/500Khz-2Mhz/A/90.25/6) |
| U8616103 | 9222215 | Reflection absolute shielded metal shaft detachable pencil probe. Operates on a 50KHz-500KHz frequency range. Right angle shaft with a 0.50 inch (12.7mm) drop and a total length of 6 inches (15.2cm). (MRL/50Khz-500Khz/A/90.5/6) |
| U8616104 | 9222216 | Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 500KHz-2MHz frequency range. Right angle shaft with a 0.50" drop. (MRL/500Khz-2Mhz/A/90.5/6) |
| U8609160 | 9222217 | |
| U8609161 | 9222218 | |
| U8609162 | 9222219 | |
| U8609163 | 9222220 | |
| U8634050 | 9222237 | |
| U8623194 | 9222308 | Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .25 in.(6.3 mm) and a operating range of 100 kHz - 500 kHz, 7-pin LEMO Powerlink Connector |
| U8626053 | 9222337 | Bridge Absolute Shielded Flexible Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink". Operates on a 100KHz-500KHz frequency range. Right Angle shaft with a 0.50" drop. Total length of 6 inches (ML/100KHZ-500KHZ/A/90.5/6FX). |
| U8690027 | 9222340 | Conductivity Probe, 60 kHz, Right Angle Probe, 0.750 in. (20 mm) tip diameter, 1.00 in. (25.4 mm) length, 16-pin LEMO connector. Used with Nortec 500C, 500S, 500D, 600C, 600S, 600D, 1700, 2000, 3000, and WorkStation instruments. Includes Alarm LED. |
| U8690028 | 9222341 | Conductivity Probe, 480 kHz, Right Angle,.750 in. (20 mm) tip diameter, 16-pin LEMO connector. Used with Nortec 500C, 500S, 500D, 600C, S or D instruments. Includes Alarm LED. |
| U8670043 | 9222342 | |
| U8626054 | 9222355 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink", Operates on a 50Khz-500Khz and has a center frequency of 200Khz, 45 degree angle, 0.50 in. drop with a 0.125" diameter tip. 6 inch overall length. (ML/100KHZ-500KHZ/A/45.5/6) |
| U8690029 | 9222360 | SPO-887L Conductivity Probe, 60 kHz, Straight Probe, .312 in. diameter with Alarm LED, 16-pin LEMO Connector |
| U8690030 | 9222361 | Conductivity Probe, 480 kHz , Straight Probe, .312 in. diameter with Alarm LED, 16-pin LEMO Connector |
| U8626012 | 9222456 | Surface Probe, Powerlink Standard Bridge Detachable Surface Probe with a diameter of .44 in. (11.2 mm) and a operating range of 500 Hz - 40 kHz (equivalent to SPO-1402, SPO-1391), 7-pin LEMO Powerlink Connector |
| U8616106 | 9222473 | Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Right angle shaft with a 0.03" drop. Total length of 6 inches. (ML/50KHZ-100KHZ/A/90.03/6 Probe) |
| U8616108 | 9222476 | Bridge Absolute Shielded Metal Detachable Pencil Probe. Operates on a 50KHz-100KHz frequency range. Right angle shaft with a 0.50" drop. Total length of 6 inches. (ML/50KHZ-100KHZ/A/90.5/6 Probe) |
| U8610266 | 9230035 | Universal rotary hole probe 0.218 inch (5.5mm) fixed diameter, 2 inch (50.8mm) working length. Operating frequency 200KHz -3MHz, Fischer 4 pin connector, reflection differential coil configuration. Model: SPO-5393 7/32 2IN W/L |
| U8610267 | 9230061 | Universal Rotary Hole Probe 0.156 inch (3.96 mm) to 0.187 inch (4.7 mm) diameter, Self Expanding 1.75 inch (44 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .156-.187) |
| U8614059 | 9230078 | Rotating Scanner Probe, SPO-3564, Probe Diameter 0.156 in. -0.187 in., Working Length 1.1 in. (28 mm), Operates 500 kHz - 3 MHz (SPO-3564) |
| U8629146 | 9230150 | |
| U8610253 | 9230157 | Universal Rotary Hole Probe 0.625 inch (15.8 mm) to 0.687 inch (17.4 mm) diameter, Self Expanding 2 inch (50 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .625-.687) |
| U8616122 | 9230174 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink" Right Angle shaft with a 0.50" drop. Operates on a 100KHz-500KHz frequency range. Total length of 3 inches (ML/100KHZ-500KHZ/A/90.5/3). |
| U8630008 | 9230193 | SPO-1071L Probe Right angle 1Khz-10Khz frequency 0.31 inch (7.8mm) diameter surface probe, bridge coil configuration with integral 6 foot (1.8m) 16 Pin Lemo cable. |
| U8614284 | 9230238 | "PowerLink straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 50kHz -500kHz, 7 pin Lemo connector, bridge coil configuration. Model: ML/50KHZ-500KHZ/A/0.0/4" |
| U8626061 | 9230248 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink" straight through shaft. Operating frequency 100 Khz-500Khz. 3 inch overall length. (ML/100KHZ-500KHZ/A/0.0/3) |
| U8800738 | 9230259 | Cable, 6 foot (1.83 Meter) length, 16 pin LEMO connector to Microdot connector with 120uH balance coil (50kHz). |
| U8626062 | 9230289 | "Straight metal shaft surface probe, 6 inch (15.2cm) overall length. Operating frequency 100kHz -500kHz, 7 pin Lemo (PowerLink) connector, bridge coil configuration. Model: ML/100KHZ-500KHZ/A/0.0/6" |
| U8629094 | 9230334 | "Ring probe, 0.53 inch (13.4mm) ID X 0.88 inch (22.3cm) OD. Operating frequency 100Hz -10kHz. Integral 6 foot (1.8m) cable with 16 pin Lemo connector, reflection coil configuration. Model: SPO-2434L" |
| U8800637 | 9230374 | SPO-2182 Dual Microdot Reflection to 16 Pin LEMO cable for adjusting sliding probes. |
| U8614285 | 9230384 | PowerLink right angle 'flexible' metal shaft surface probe, 6 inch (15.2cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 50kHz -500KHz, 7 pin Lemo connector, bridge coil configuration. Model: ML/50KHZ-500KHZ/A/90.2/6FX |
| U8614286 | 9230385 | "PowerLink right angle bent metal shaft surface probe, 5 inch (12.7cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 50kHz -500kHz, 7 pin Lemo connector, bridge coil configuration. Model: ML/50KHZ-500KHZ/A/90.5/5B" |
| U8610985 | 9230387 | "Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 50kHz -500kHz, 7 pin Lemo (PowerLink) connector, bridge coil configuration. Model: ML/50KHZ-500KHZ/A/0.0/3" |
| U8629090 | 9230388 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink" Flexible straight shaft. Operating frequency 50Khz-500Khz, 4 inch overall length (ML/50KHZ-500KHZ/A/0.0/4FX) |
| U8629301 | 9230392 | Adaptor, LEMO 16 Pin to Burndy 8 Pin, Bridge/Reflection Probe Type |
| U8629538 | 9230395 | SPO-5326L 2Khz-200Khz Special Purpose Corrosion Probe Designed for use on Aluminum structures |
| U8629157 | 9230403 | SPO-5328L 500HZ-60KHZ .44 |
| U8629163 | 9230492 | SPO-3806 Sliding Probe Reflection (Probe Only) Triax Lemo connector. |
| U8610280 | 9230531 | Universal Rotary Hole Probe 0.125 inch (3.17 mm) to 0.156 inch (3.96 mm) diameter, Self Expanding 1.75 inch (44 mm) working length, Operating frequency 200 kHz - 3 MHz Fischer 4 pin connector, reflection differential coil configuration (SPO-5965 .125-.156) |
| U8800739 | 9230585 | 16 Pin LEMO to Microdot with Balance Coil 8.2UH cable, 6 foot long (1.8m) for single coil microdot probes operating between 1MHz - 2MHz . |
| U8670005 | 9230721 | |
| U8614109 | 9230784 | Rotating Scanner Probe,SPO-3564, 200 kHz - 3 MHz , .125 in. to .156 in. hole size range, 1.1 inch working length, 4 Pin LEMO Connector? |
| U8800741 | 9230844 | SPO-6599, 16 pin LEMO to dual BNC connectors, 6 inches (15.2cm) long. |
| U8800703 | 9230845 | 16 Pin to Microdot NPID-1024 cable – No balance coil – To be used with Nortec 2000D+ or N500 series instruments with internal balance coils. Not to be used with N600 series instruments. |
| U8633067 | 9230977 | |
| U8629180 | 9230982 | SPO-1958 (Probe Only) Adjustable reflection Sliding probe with 2 single pin Microdot connectors. |
| U8610399 | 9230985 | SPO-2210 (PROBE ONLY) |
| U8629476 | 9230999.00 | |
| U8670011 | 9231075 | |
| U8629540 | 9231109 | NECP-1152 SS, Weld Probe, Standard Bridge Detachable Weld Probe, 100 kHz - 1 MHz, 45 Degree, 7.9 mm (0.312 in.) Tip Diameter, Overall length 140.0 mm (5.5 in.), Triax Fischer/Lemo connector. |
| U8610410 | 9231147 | Ring reflection probe with Fischer/ Lemo triax connection, 100Hz-1KHz frequency range (SPO-6087) |
| U8629497 | 9231155 | Special purpose metal shaft probe. 5 inch overall length with 0.065 to 0.075 inch thick flat shaft 3 inches long. Side mounted 100 KHz shielded coil (0.125 inch diameter), microdot connector, absolute coil configuration. (SPO-3503) |
| U8629211 | 9231350 | P/50KHZ-500KHZ/A/90.5/5 |
| U8629992 | 9231640 | PowerLink right angle "flexible" metal shaft surface probe, 4 inch (10.1cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 100KHz -500KHz, 7 pin Lemo connector, bridge coil configuration (ML/100KHZ-500KHZ/A/90.5/4FX). |
| U8250101 | 9231641 | |
| U8629381 | 9231646 | |
| U8626039 | 9231662 | Reflection Absolute unshielded Metal Detachable Pencil Probe. Operates on a 50KHz-500KHz frequency range. Right angle shaft with a 0.50" drop and bent stainless steel shaft. Total length of 6 inches. (MRL/50Khz-500Khz/Au/90.5/6BSS)? |
| U8629884 | 9231812 | SPO-1957 (Probe Only) Adjustable reflection Sliding probe with 2 single pin Microdot connectors. |
| U8610678 | 9231813 | "Right angle metal shaft surface probe, 4 inch (10.1cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 100kHz -500kHz, 7 pin Lemo (PowerLink) connector, bridge coil configuration. Model: ML/100KHZ-500KHZ/A/90.2/4" |
| U8610681 | 9231821 | PowerLink right angle metal shaft surface probe, 4 inch overall length with 0.2 inch drop at tip. Operating frequency 100KHz -500KHz, 7 pin Lemo connector, differential bridge coil configuration. Probe is direction sensitive and operates from right to left motion (Wiper Mode "WP"), (ML/100KHZ-500KHZ/D/90.20/4/WP). |
| Q6700004 | 9323976 | |
| U8690033 | 9403356 | Weld Probe, 100 kHz - 600 kHz, Straight Probe, 8.0 mm (0.314 in.) tip diameter, 5.5 cm (2.16 in.) length, 7-pin LEMO PowerLink Connector (WLD-8-55-7L) |
| U8629526 | 9403359 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. (ML/50Khz-500Khz/A/0.0/4) |
| U8629530 | 9403360 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/50Khz) |
| U8629269 | 9403361 | Paint Thickness Probe, 5 kHz to 250 kHz, 6.35 mm (0.25 in.) tip diameter, 10.1 mm (4.0 in.) overall length, 7-pin LEMO PowerLink Connector. |
| U8629270 | 9403362 | Straight Weld Probe, 100 kHz to 600 kHz, 5.0 mm (0.196 in.) tip diameter, 6.1 mm (2.4 in.) overall length, 7-pin LEMO PowerLink Connector (WLD-5-63-7L) |
| U8616149 | 9403364 | "Straight metal shaft surface probe, 4 inch (10.1cm) overall length with 0.072 inch (1.8mm) diameter tip. Operating frequency 1MHz -3MHz, 7 pin LEMP (PowerLink) connector, bridge coil configuration. Model: MM7L-40FX-1M-3M" |
| U8614296 | 9403372 | PowerLink right angle metal shaft surface probe, 4 inch (10.1cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 50kHz -500KHz, 7 pin Lemo connector, bridge coil configuration. Model: M7L905-40 |
| U8629539 | 9403373 | Weld Probe, PowerLink Standard Bridge Detachable Weld Probe, 100 kHz - 600 kHz, Right Angle, 5.0 mm ( 0.196 in.) Tip Diameter, Overall length 50.0 mm (1.96 in.), 7 Pin LEMO connector. (WLD90I-5-50-7L |
| U8690038 | 9403374 | 90 degree inline weld surface probe, 100 KHz to 600 KHz, 8.0 mm (0.314 inch) tip diameter, 5.0 mm (0.196 inch) overall length, 7 pin LEMO PowerLink connector. (WLD90I-8-50-7L) |
| U8633027 | 9403377 | NEC-4039-7L |
| U8629061 | 9403383 | Right angle surface pencil probe with 7 pin Lemo (PowerLink) connector. Absolute shielded coil operating between 50KHz and 500KHz (200KHz center frequency). 6 inch (15.2cm) overall length with 0.50 inch (12.7mm) drop at probe tip (M7L905-60). |
| U8626125 | 9403398 | PowerLink Right angle metal shaft surface probe, 4 inch overall length with 0.5 inch drop at tip. Operating frequency 1MHz -6MHz, 7 pin Lemo connector, bridge coil configuration (M7L905-40-1-6M). |
| U8626126 | 9403399 | PowerLink Right angle metal shaft surface probe, 4 inch overall length with 0.5 inch drop at tip. Operating frequency 200KHz -1MHz, 7 pin Lemo connector, bridge coil configuration (M7L905-40-200K-1M). |
| U8626127 | 9403400 | Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 1MHz -6MHz, LEMO 7 pin (PowerLink) connector, bridge coil configuration. Model: M7L-30-1-6M |
| U8629527 | 9403403 | Bridge Absolute shielded metal shaft 7 Pin LEMO "PowerLink" detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. (ML/200Khz-1Mhz/A/0.0/4) |
| U8629528 | 9403404 | Bridge Absolute shielded metal shaft 7 Pin LEMO "PowerLink" detachable pencil probe. Operates on a 1 MHz - 6MHz frequency range and has a center frequency of 2 Mhz. Straight shaft with a 0.125 in. diameter tip. 4 in. overall length. (ML/1Mhz-6Mhz/A/0.0/4) |
| U8629529 | 9403405 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.(ML/50Khz) |
| U8620399 | 9403406 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 200 kHz - 1 MHz and has a center frequency of 500 kHz, Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length.(ML/50Khz) |
| U8629531 | 9403408 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/EMO "PowerLink", Operates on a 200 KHz - 1 MHz and has a center frequency of 500 kHz, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/200Khz) |
| U8629532 | 9403409 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLInk", Operates on a 1 MHz - 6 MHz and has a center frequency of 2 MHz, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/1Mhz-6Mhz) |
| U8629533 | 9403410 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 50 kHz - 500 kHz and has a center frequency of 200 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/50Khz) |
| U8629534 | 9403411 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLink", Operates on a 200 kHz - 1 MHz and has a center frequency of 500 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/200Khz) |
| U8629535 | 9403412 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/LEMO "PowerLInk", Operates on a 1 MHz - 6 MHz and has a center frequency of 2 MHz, Right Angle Shaft, 0.50 in. (12.7 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. (ML/1Mhz-6Mhz/A/90.5/6) |
| U8629522 | 9403421 | |
| U8629722 | 9403425 | PowerLink forty-five degree angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7cm) drop at tip. Operating frequency 50kHz -500kHz, 7 pin Lemo connector, bridge coil configuration. Model: M7L455-60 |
| U8629920 | 9403431 | |
| U8629696 | 9403444 | "Right angle metal shaft surface probe, 6 inch (15.2cm) overall length, 0.5 inch (12.7mm) drop and 0.094 inch (2.39mm) diameter at the tip. Operating frequency 200kHz -1MHz, 7 pin Lemo connector, bridge coil configuration. Model: MY7L905-60FX-200K-1M" |
| U8629698 | 9403445 | Right angle metal shaft surface probe, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop and 0.072 inch (1.8mm) diameter at tip. Operating frequency 50kHz -500kHz, 7 pin LEMO connector, bridge coil configuration. Model: MM7L903-50 |
| U8629707 | 9403446 | |
| U8610918 | 9403447 | |
| U8610968 | 9403455 | Right angle metal shaft surface probe, 3 inch overall length with 0.2 inch drop and 0.072 inch diameter at tip. Operating frequency 50KHz -500KHz, Lemo 7 pin (PowerLink) connector, bridge coil configuration (MM7L902-30). |
| U8610972 | 9403456 | |
| U8616150 | 9403460 | |
| U8616151 | 9403495 | |
| Q2500445 | 9403540 | " Right angle metal shaft surface probe, 7 inch (17.7cm) overall length with 0.1 inch (2.5mm) drop at tip. Operating frequency 50kHz -500kHz, 7 pin Lemo (PowerLink) connector, bridge coil configuration. Model: M7L901-70 " |
| Q2501135 | 9403568 | |
| U8629327 | 9522189 | Adaptor, LEMO 16 Pin to Amphenol 4 Pin, Bridge Probe Type Model: L16-A4-B and AN16-Z |
| U8629278 | 9522205 | AH22-BR 12P LEMO To 8 Pin Burndy Adapter |
| U8767317 | 9522211 | Adaptor, reflection coil configuration probes with 12 Pin LEMO connector to Nortec 500/ 1000 or 2000 instrument (16 Pin LEMO) Model: L16-L12-R & ARN16-H22 |
| U8767318 | 9522212 | Adaptor, bridge coil configuration probes with 12 Pin LEMO connector to Nortec 500/ 1000 or 2000 instrument (16 Pin LEMO) Model: L16-L12-B & AN16-H22 |
| U8767297 | 9522213 | Adaptor, Bridge coil configuration probes with 4 pin Fischer connector to Nortec 500/1000 or 2000 instruments (16 Pin Lemo) Model: L16-F4-B & AN16-Z21 |
| U8779075 | 9522214 | Adaptor, Reflection coil configuration probes with 4 pin Fischer connector to Nortec 500, 600, 1000 or 2000 instruments (16 Pin Lemo) Model: L16-F4-R & ARN16-Z21 |
| U8767166 | 9522218 | Adaptor, LEMO 16 Pin to LEMO 7 Pin, Bridge Probe Type |
| U8767167 | 9522219 | " Adaptor, LEMO 16 Pin to LEMO 7 Pin, reflection coil configuration probes only. Formerly P/N ARN16-HLC2 (NDT Engineering). " |
| U8840093 | ACB1-TF-6-1-50K | |
| U8767206 | AMF-M-10FX | Straight flex adaptor, Microdot to Microdot connector, 10 inches (25.4cm) long. |
| U8767209 | AMF-MR-8FX | |
| U8600002 | BPM-10-TF | Manual hole probe, 0.156 inch (3.9mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 50kHz -500kHz, triax Fischer/LEMO connector, bridge coil configuration. |
| U8600003 | BPM-12 | Manual hole probe, 0.187 inch (4.7mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600565 | BPM-14-TF | |
| U8600007 | BPM-16 | |
| U8600566 | BPM-18-TF | |
| U8600011 | BPM-20 | Manual hole probe, 0.312 inch (7.9mm) diameter and 2.0 inch (5.08cm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600017 | BPM-24 | Manual hole probe, 0.375 inch (9.5mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600018 | BPM-28 | Manual hole probe, 0.437 inch (11.1mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600022 | BPM-32 | Manual hole probe, 0.500 inch (12.7mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600024 | BPM-36 | Manual hole probe, 0.562 inch (14.2mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600025 | BPM-40 | Manual hole probe, 0.625 inch (15.8mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600459 | BPM-44 | Manual hole probe, 0.687 inch (17.4mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600027 | BPM-48 | Manual hole probe, 0.750 inch (19.05mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration. |
| U8600029 | BPM-52 | Manual hole probe, 0.812 inch (20.6mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600030 | BPM-56 | Manual hole probe, 0.875 inch (22.2mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 50kHz -500kHz, microdot connector, bridge absolute coil configuration. |
| U8600564 | BPM-8-TF | |
| U8600571 | BPMD-10-TF | |
| U8600573 | BPMD-14-TF | |
| U8600570 | BPMD-8-TF | |
| U8600804 | BPRA-10-SS-1.1WL | Rotary Hole Probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.156 inch (3.9mm) diameter, 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration. |
| U8250285 | BPRA-10-SS-1.5WL | |
| U8614010 | BPRA-12-SS | Rotary hole probe, stainless steel housing for use with RA-19, RA-2000 and MiniMite Lemo scanner series. 0.187 inch (4.74mm) diameter, 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration. |
| U8610701 | BPRA-14-SS | Rotary hole probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.218 inch (5.54mm) diameter and 2.0 inch (50.8mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration. |
| U8600434 | BPRA-16-SS | Rotary hole probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.250 inch (6.3mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration. |
| U8614237 | BPRA-20-SS | |
| U8614019 | BPRA-40-SS | |
| U8614025 | BPRA-8-SS | Rotary hole probe, stainless steel housing for use with RA- 19, RA-2000 and MiniMite Lemo scanner series. 0.125 inch (3.1mm) diameter and 1.1 inch (27.9mm) working length. Operating frequency 100KHz -2MHz, Lemo 4 pin connector, reflection differential coil configuration. |
| U8614026 | BPRAF-10 | |
| U8614027 | BPRAF-12 | |
| U8614252 | BPRAF-16 | |
| U8610006 | BPU-10-SS | |
| U8610022 | BPU-14-SS | |
| U8610029 | BPU-16-SS | Universal rotary hole probe stainless steel housing, 0.250 inch (6.35mm) diameter, 2.0 inch (5.08cm) working length. Operating frequency 100kHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8600187 | BPU-8-SS | |
| U8610098 | BPUF-12 | |
| U8600094 | BXM-12-16 | |
| U8600098 | BXM-16-20 | |
| U8610146 | BXU-12-16 | Universal Rotary Hole Probe 0.187 inch (4.7mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration. |
| U8610151 | BXU-16-20 | Universal Rotary Hole Probe 0.250 inch (6.3mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration. |
| U8610152 | BXU-20-24 | Universal Rotary Hole Probe 0.312 inch (7.9mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration. |
| U8610153 | BXU-24-28 | Universal Rotary Hole Probe 0.375 inch (9.52mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8610154 | BXU-28-32 | |
| U8610155 | BXU-32-40 | Universal Rotary Hole Probe 0.500 inch (12.7mm) diameter, screw expansion, 2 inch (5.08cm) working length. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, un-shielded reflection differential coil configuration. |
| U8610159 | BXU-40-48 | |
| U8610160 | BXU-48-56 | |
| U8614053 | BYRA-8-10 | |
| U8610182 | BYU-12-16-2WL | |
| U8610194 | BYU-24-28 | Universal Adjustable Hole Probe, 3/8" to 7/16" |
| U8250276 | BYU-88-96 | |
| U8270128 | CAB-032-OM2_5 | 32 channels detachable cable for ECA flexible probe FBB-051-500-032, absolute bridge mode, cable length: 2.5M |
| U8779664 | CAB-032-OM5 | 32 channels detachable cable for ECA flexible probe FBB-051-500-032, absolute bridge mode, cable length: 5M |
| U8779669 | CABR2-030-OM2_5 | 30 channels detachable cable for ECA flexible probe FBB-051-500-032, Double Reflexion mode, cable length: 2.5M |
| U8779665 | CABR2-030-OM5 | 30 channels detachable cable for ECA flexible probe FBB-051-500-032, Double Reflexion mode, cable length: 5M |
| Q7670051 | CBAS-10818-0001 | |
| Q7670054 | CBAS-10821-0001 | |
| U8800232 | CBM-6 | Cable, 6 foot length, Microdot to BNC |
| U8800241 | CBN-TF-6 | |
| U8800244 | CBR-4SL-6 | Cable, 6 foot length, Bridge coil configuration for probes with 4pin step lemo connector to 8 Pin Burndy instruments. |
| Q8000034 | CBR-M-6-1-3M | |
| U8800258 | CH22-2M-6 | Cable, 6 foot length, Bridge coil configuration for probes with 2 pin Microdot to connect to Hocking Phasec 2200 and Phasec 2s and 2d (12 Pin) |
| U8800896 | CH22-4F-6 | Cable, 6 foot length, for Hocking Phasec 2200 or Phasec 2s, 2d or 3d to 4-pin Fischer. |
| U8690040 | CH22-M-6 | Cable, 6 foot length, Bridge coil configuration with 12 Pin Lemo connector to Microdot connector for Hocking Phasec 2200 and Phasec 2. |
| U8800891 | CH22-M-6-50-500K | Cable, 6 foot length, absolute coil configuration probes with microdot connector to Phasec/ Locator instrument (12 pin Lemo). Contains internal balance coil to operate probes in the 50KHz-500KHz frequency range. |
| U8861298 | CIRCLETEMPLATE | Circle Template |
| U8800273 | CN16-2M-6 | Cable, 6 foot length, Bridge coil configuration, Nortec 16 Pin (Inst) to 2-Pin Microdot-Bridge |
| U8800275 | CN16-4F-6 | Cable, 6 foot length, Bridge coil configuration, Nortec 1000, 2000 and 500 series instruments (16 pin Lemo) to 4pin Fischer |
| U8800276 | CN16-4L-6 | Cable, 6 foot length, Nortec 1000, 2000 and 500 series instruments (16 pin Lemo) to 4 Pin Lemo for Weld Probe (4 Pin LEMO) |
| U8800278 | CN16-M-6-200K-1M | Cable, 6 foot length, Nortec 1000, 2000 and 500 series instruments with balance coil for probe between 200Khz-1Mhz. |
| U8800666 | CN16-MR-6-50-500K | Cable, 6 foot length, bridge coil configuration probes with single right angle microdot connector to N500 or N2000 instrument (16 pin Lemo). Allows operation of 50kHz-500kHz single pin microdot probes on the Nortec eddy current instruments listed above. Not required for N600 instruments. |
| U8801390 | COS-7L-6 | Cable 6 foot length, bridge coil configuration probes with 7 pin Lemo connector to Omniscan instrument (19 pin Lemo). |
| U8800284 | COS-TF-6 | Cable adaptor, 6 foot length, connecting an OmniScan (19 pins) to Triax-Fisher probes and cables Wired for differential. |
| U8800397 | CRH22-2M-6 | Cable, 6 foot length, 12 Pin Lemo to 2 Pin Microdot for Hocking Instruments |
| U8800405 | CRN16-2M-6 | Cable, 6 foot length, Reflection coil configuration, Nortec 16 Pin (Inst.) to 2 Pin Microdot |
| U8800814 | CRN16-4L-6 | Cable 6 foot length, reflection coil configuration probes with 4 pin Lemo connector to N600/N500/N2000 instrument (16 pin Lemo). |
| U8801083 | CRN16-TF-15 | Cable, 15 foot (4.5 Meter) length, 16 pin LEMO connector to triax Fischer/LEMO connector, reflection coil configuration. |
| U8800411 | CROS-TF-6 | Cable adaptor, 6 foot length, connecting an OmniScan (19 pins) to Triax-Fisher probes and cables Wired for reflection. |
| U8600132 | CSM100-10 | Manual rotary 100 degree countersink hole probe with plastic housing, 0.156 inch (3.9mm) diameter pilot. Operating frequency 50kHz -50kHz, microdot connector, bridge absolute coil configuration. |
| U8600134 | CSM100-12 | Manual rotary 100 degree countersink hole probe with plastic housing, 0.187 inch (4.7mm) diameter pilot. Operating frequency 50kHz -50kHz, microdot connector, bridge absolute coil configuration |
| U8600608 | CSM100-14 | Manual rotary 100 degree countersink hole probe with plastic housing, 0.218 inch (5.1mm) diameter pilot. Operating frequency 50kHz -50kHz, microdot connector, bridge absolute coil configuration. |
| U8600135 | CSM100-16 | |
| U8602103 | CSRA100-6.35M | |
| U8602101 | CSRA100-8.7M | |
| U8602166 | CSU100-4.0M-SS | Universal rotary 100 degree countersink hole probe with stainless steel housing, 4.0mm (0.157 inch) diameter pilot. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8600979 | CSU100-5.0M-SS | Universal rotary 100 degree countersink hole probe with stainless steel housing, 0.196 inch (5.0mm) diameter. Operating frequency 100KHz -2MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8800414 | CZ21-2M-6 | Cable 6 foot length, reflection coil configuration probes with two single pin microdot connectors to Zetec Miz 21 instrument (4 pin Fischer). |
| U8800419 | CZ21-M-6-50-500K | Cable |
| U8779886 | DGL-AF4-BNC-8 | Cable adapter, 8 inch length, 4 pin amphenol female connector to BNC male connector. |
| Q2700001 | E400090A | "Reversed coil order -ECA flexible surface probe, 51 mm coverage, 500 kHz center frequency, 32 coils " |
| U8779368 | ENC1-K-ECA | Eddy Current Array Probe encoder with full holder, 2.9 m cable with DE15 connector type |
| U8800620 | EWSX280A | Encoder cable |
| U8270083 | FBB-051-500-032 | ECA flexible surface probe, 51 mm coverage, 500 kHz center frequency, 32 coils |
| Q2700031 | FBB051-KIT-FLAT-R2 | FlexArray probe kit for flat surface, reflection cable and encoder included |
| U8270155 | FBB051-KIT-PIPE | FlexArray Probe kit detection of SCC on 33.4 mm OD pipe and over |
| Q2700030 | FBB051-KIT-PIPE-R2 | FlexArray probe kit detection on 33.4 mm OD pipe and over, reflection cable and encoder included |
| U8270154 | HSB-01 | Bond Testing Hand Scanner with cable, and encoder (S-PC-P14 probe NOT included) |
| U8270153 | HSB-SPCP14 | Bond Testing Hand Scanner with S-PC-P14 probe, cable, and encoder |
| Q7670041 | HX-ADPT-KIT | |
| U8610458 | LP903-50B-1-30K | Low Frequency Probe |
| U8610459 | LP903-50B-TF-1-30K | Low frequency right angle pencil probe with "bent" metal shaft. 0.187 inch (4.7mm) diameter, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop at tip. Frequency range 1kHz-30kHz, bridge coil configuration, triax Fischer/Lemo connector. |
| U8610461 | LP905-40-TF-1-30K | Low Frequency Probe |
| Q2500823 | LPQ-60-TF-1-30K | |
| U8610469 | LPQ905-40-TF-1-30K | |
| U8610471 | LPQ905-50B-TF-1-30K | Low Frequency Probe |
| U8610962 | LPQ905-50B-TF-30-50K | |
| U8634054 | LS042-1 | |
| U8634062 | LS203-1 | Low frequency right angle spot probe, 0.275 inch (6.9mm) diameter with a frequency range of 1kHz-8kHz. Bridge coil configuration, 2 pin microdot connector. |
| Q6330001 | LS204-1-TF | |
| U8633026 | LTW1022 | Low Frequency Sliding Probe |
| U8690010 | LTW5010-1 | Reflection Sliding Probe, Adjustable, 1 kHz to 20 kHz, (2) 1-pin Microdot Connector |
| Q2500591 | MagnaFORM-KIT-MANUAL | |
| Q2500592 | MagnaFORM-KIT-SCANNERS | |
| U8270174 | MESX320 | ECA advanced calibration plate with surface notch, Aluminium |
| U8779537 | MESX321 | ECA advanced calibration plate with surface notch, Stainless Steel 316 material |
| U8616093 | ML/100KHZ-500KHZ/A/90.5/6 | Bridge Absolute Shielded Metal Detachable Pencil Probe. 7 Pin Fischer/Lemo "PowerLink". Operates on a 100KHz-500KHz frequency range. Right Angle with a 0.50" drop. Total length of 6 inches (ML/100KHZ-500KHZ/A/90.5/6). |
| U8620002 | MMP-30 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Straight shaft with a 0.072 inch (1.83mm) diameter tip. Total length of 3 inch (76mm). |
| U8616365 | MMP-30-1-3M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Straight shaft with a 0.072 inch (1.8mm) diameter tip. Total length of 3 inches (7.62cm). |
| U8616366 | MMP-30-200K-1M | Straight metal shaft surface probe, 3 inch (7.6cm) overall length and 0.072 inch (1.8mm) diameter at tip. Operating frequency 200kHz -1MHz, microdot connector, absolute bridge coil configuration. |
| U8620006 | MMP305-45 | Thirty degree angle metal shaft surface probe, 4.5 inch (11.4cm) overall length with 0.5 inch (12.7mm) drop and 0.072 inch (1.8mm) diameter at tip. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration. |
| U8620009 | MMP305-60 | Absolute shieleded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz and has a center frequency of 200kHz, 30 degree shaft, 0.5in (12.7mm) drop with a 0.072" (1.83mm) diamerter tip. 6" (152mm) overall length. |
| U8610623 | MMP-30FX | |
| U8616367 | MMP-30FX-1-3M | |
| U8620010 | MMP-40 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Straight shaft with a 0.072" (1.83mm) diameter tip. Total length of 4" (102mm). |
| U8616153 | MMP-40FX | |
| U8616154 | MMP-40FX-200K-1M | |
| U8620280 | MMP455-40 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Forty-five degree angle shaft with a 0.50" (12.7mm) drop and a 0.072" (1.83mm) diameter tip. Total length of 4" (102mm). |
| U8620443 | MMP455-40-6M | Absolute shielded metal shaft microdot detachable pencil probe. Operates at a frequency of 6MHz . Forty-five degree angle shaft with a 0.50 inch (12.7mm) drop and a 0.072 inch (1.83mm) diameter tip. Total length of 4 inches (102mm). |
| U8620302 | MMP-60 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Straight shaft with a 0.072" (1.83mm) diameter tip. Total length of 6" (152mm). |
| U8620016 | MMP-60-1-3M | |
| U8620017 | MMP-60FX | Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Straight shaft with a 0.072" (1.83mm) diameter tip. Total length of 6" (152mm). |
| U8616344 | MMP9003-60FX | Absolute shielded "flexible" metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.03 inch (0.76mm) drop and a 0.072 inch (1.8mm) diameter tip. Total length of 6 inches (15.2cm). |
| U8620021 | MMP902-40 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop and a 0.072 diameter tip. Total length of 4" (102mm). |
| U8620278 | MMP902-40-1-3M | |
| U8620415 | MMP902-50FX | Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop and a 0.072 diameter tip. Total length of 5" (203mm). |
| U8620027 | MMP902-60 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop and a 0.072 diameter tip. Total length of 6" (152mm). |
| U8620385 | MMP903-60 | |
| U8620376 | MMP905-30 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Right angle shaft with a 0.50" (12.7mm) drop and a 0.072" (1.83mm) diameter tip. Total length of 3" (76mm). |
| U8620034 | MMP905-40 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200 kHz. Right angle shaft with a 0.50" (12.7mm) drop and a 0.072" (1.83mm) diameter tip. Total length of 4" (102mm). |
| U8616361 | MMP905-60-200K-1M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500kHz. Right angle shaft with a 0.5 inch (12.7mm) drop and a 0.072 inch (1.8mm) diameter tip. Total length of 6 inches (15.2cm). |
| U8629993 | MMP905-60B | Absolute shielded "bent" metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50 inch (12.7mm) drop and a 0.072 inch (1.82mm) diameter tip. Total length of 6 inches (15.2cm). |
| U8623013 | MMTF305-40 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Thirty degree angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 4.0 inches. |
| U8623016 | MMTF305-50 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Thirty degree angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 5.0 inches. |
| U8623019 | MMTF-40 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Straight shaft with a 0.072 inch diameter tip. Total length of 4.0 inches. |
| U8623239 | MMTF-40-200K-1M | Bridge shielded metal shaft triax Fischer/Lemo detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500 kHz. Straight shaft with a 0.072 inch (1.8mm) diameter tip. Total length of 4 inches (10.1cm). |
| U8616427 | MMTF455-40-200K-1M | |
| U8610624 | MMTF455-60 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 6.0 inches. |
| U8616415 | MMTF901-60FX | Right angle "flexible" metal shaft surface probe with 0.072 inch (1.8mm) diameter probe tip. 10 inch (25.4cm) overall length with 0.10 inch (2.54mm) drop at tip. Operating frequency 50KHz -500KHz, Fischer/Lemo triax connector, bridge coil configuration. |
| U8623240 | MMTF902-40 | Right angle metal shaft surface probe, 4 inch (10.1cm) overall length with 0.2 inch (5.08mm) drop and 0.072 inch (1.8mm) diameter tip. Operating frequency 50kHz -500kHz, triax Fischer\Lemo connector, bridge coil configuration. |
| U8616417 | MMTF902-40B | |
| U8620340 | MMTF902-50FX-200K-1M | Right angle "flexible" metal shaft surface probe, 5 inch (12.7cm) overall length with 0.2 inch (5.08mm) drop and 0.072 inch (1.83mm) diameter at tip. Operating frequency 200kHz -1MHz (500KHz center frequency), Fischer/Lemo triax connector, bridge coil configuration. |
| U8614311 | MMTF902-60-1-6M | |
| U8623242 | MMTF905-40 | |
| U8623322 | MMTF905-40-1-6M | |
| U8623033 | MMTF905-60 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.5 inch drop and a 0.072 inch diameter tip. Total length of 6.0 inches. |
| U8610492 | MMTF905-60-1-6M | Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7mm) drop and 0.072 inch (1.8mm) diameter tip. Operating frequency 1MHz -6MHz, triax Fischer\LEMO connector, bridge coil configuration. |
| U8250184 | MMTF905-60-200K-1M | Absolute shielded metal shaft triax Fischer/Lemo detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500 kHz. Right angle shaft with a 0.50 inch (12.70mm) drop and a 0.072 inch (1.82mm) diameter tip. Total length of 6 inches.. |
| U8620303 | MP.045-60BL | Absolute shielded metal shaft microdot detachable blade probe with a surface of .045. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Straight shaft with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm). |
| U8620047 | MP-10 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Straight shaft with 0.125" (3.18mm) diameter tip. Total length 1 inches. |
| U8610997 | MP10B15-9003-60-200K-1M | |
| U8620052 | MP-20 | Straight metal shaft surface probe, 2 inch (5.08cm) overall length. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration. |
| U8620342 | MP-20-200K-1M | Straight metal shaft surface probe, 2 inch (5.08cm) overall length. Operating frequency 200kHz -1MHz, microdot connector, absolute bridge coil configuration. |
| U8620053 | MP-30 | Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration. |
| U8620055 | MP-30-1-3M | Straight metal shaft surface probe, 3 inch (7.6cm) overall length. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8616291 | MP302-60 | |
| U8620059 | MP305-40 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz and has a center frequency of 200kHz. 30 degree shaft, .50in (12.7mm) drop with a 0.125" (3.18mm) (3.18mm) diameter tip. 4" (102mm) overall length. |
| U8616288 | MP305-50-1-3M | |
| U8620312 | MP305-50-200K-1M | |
| U8620062 | MP305-60 | |
| U8610715 | MP305-60-1-3M | |
| U8620067 | MP-40 | Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration. |
| U8620068 | MP-40-1-3M | Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8620069 | MP-40-200K-1M | Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 200kHz -1MHz, microdot connector, absolute bridge coil configuration. |
| U8610891 | MP-40FX-1-3M | |
| U8610837 | MP-45 | Straight metal shaft surface probe, 4.5 inch (11.4cm) overall length. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration. |
| U8616298 | MP4510-40 | |
| U8620076 | MP-45-1-3M | Straight metal shaft surface probe, 4.5 inch (11.4cm) overall length. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8620079 | MP453-40-1-3M | |
| U8610767 | MP453-45 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz and has a center frequency of 200kHz. 45 degree shaft, 0.3" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. 4.5" (114mm) overall length. |
| Q2500718 | MP453-45-1-3M | Forty-five degree angle metal shaft surface probe, 4.5 inch (11.4cm) overall length with 0.3 inch (7.6mm) drop at tip. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8623373 | MP453-60-1-3M | Forty-five degree angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.3 inch (7.6mm) drop and 0.072 inch (1.8mm) diameter at tip. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8629678 | MP453-60-200K-1M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200KHz-1MHz frequency range and has a center frequency of 500 KHz. 45 degree angle shaft with a 0.30" drop and a 0.072" (1.83mm) diameter tip. Total length of 6" (152mm). |
| U8610497 | MP455-120FX-200K-1M | |
| U8616295 | MP455-30-1-3M | |
| U8620086 | MP455-40 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm). |
| U8620087 | MP455-40-1-3M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm). |
| U8620088 | MP455-40C | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" curved drop and a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm). |
| U8620089 | MP455-45 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4.5" (114mm). |
| U8620090 | MP455-45-1-3M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 4.5" (114mm). |
| U8620094 | MP455-50 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 5" (127mm). |
| U8620346 | MP455-50-1-3M | |
| U8629762 | MP455-50-200K-1M | |
| U8620095 | MP455-50C | |
| U8620097 | MP455-60 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" drop and a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm). |
| U8620099 | MP455-60C | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.50" curved drop and a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm). |
| U8620106 | MP457-60 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Forty-Five degree angle shaft with a 0.70" drop and a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm). |
| U8620108 | MP-50 | Straight metal shaft surface probe, 5 inch (12.7cm) overall length. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration |
| U8620403 | MP-50-200K-1M | |
| U8610632 | MP-60-200K-1M | Straight metal shaft surface probe, 6.0 inch (15.2cm) overall length. Operating frequency 200kHz -1MHz, microdot connector, absolute bridge coil configuration. |
| U8620114 | MP-60FX | Straight flexible metal shaft surface probe, 6.0 inch (15.2cm) overall length. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration. |
| U8620115 | MP-60FX-1-3M | Straight flexible metal shaft surface probe, 6.0 inch (15.2cm) overall length. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8616209 | MP9003-50B | |
| U8620348 | MP9003-60 | Right angle metal shaft surface probe, 6 in. overall length and 0.03 in. drop at tip. Operating frequency 50 kHz - 500 kHz, microdot connector, absolute bridge coil configuration. |
| U8620398 | MP9003-60-1-3M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1 MHz - 3 MHz frequency range and has a center frequency of 2 MHz. Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. |
| U8620397 | MP9003-60-200K-1M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Right Angle Shaft, 0.03 in. (0.76 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. |
| U8620142 | MP901-40 | |
| U8620144 | MP901-40FX | Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.10" drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm). |
| U8616211 | MP901-50-1-3M | Right angle metal shaft surface probe, 5 inch (12.7mm) overall length with 0.1 inch (2.5mm) drop at tip. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8620147 | MP901-60 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.10" drop with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm). |
| U8610505 | MP901-60B | |
| U8616269 | MP902-100FX-1-3M | Absolute shielded "flexible" metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.20 inch (5.08mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 10 inches (25.4cm). |
| U8616270 | MP902-100FX-200K-1M | Right angle flexible metal shaft surface probe, 10 inch (25.4cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 200kHz -1MHz, microdot connector, absolute bridge coil configuration. |
| U8620157 | MP902-40-1-3M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm). |
| U8620160 | MP902-40FX | Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm). |
| U8616199 | MP902-40FX-1-3M | Absolute shielded "flexible" metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.20 inch (5.08mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 4 inches (10.1cm). |
| U8620317 | MP902-45-1-3M | |
| U8620162 | MP902-45FX | Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 4.5" (114mm). |
| U8610508 | MP902-50-200K-1M | |
| U8620164 | MP902-50B | Absolute shielded metal shaft microdot detachable pencil probe with bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.2 inch (5.08mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 5 inches (127mm). |
| U8620165 | MP902-50B-1-3M | Right angle bent metal shaft surface probe, 5 inch (12.7cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8620167 | MP902-60 | Surface Probe, 50 kHz to 500 kHz, 200 kHz center frequency, Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. (3.18 mm) tip diameter, 152 mm (6 in.) length, Microdot Connector |
| U8620168 | MP902-60-1-3M | Surface Probe, 1 MHz - 3 MHz, 2 MHz center frequency, Right Angle Shaft, 0.20 in. (5.08 mm) Drop, 0.125 in. (3.18 mm) tip diameter, 152 mm (6 in.) length, Microdot Connector |
| U8620401 | MP902-60-200K-1M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200 kHz - 1 MHz frequency range and has a center frequency of 500 kHz. Right Angle Shaft, 0.20 in. (5.08 mm) drop with a 0.125 in. diameter tip. 6 in. overall length. |
| U8620373 | MP902-60B-1-3M | Right angle bent metal shaft surface probe, 6 inch (15.2cm) overall length with 0.2 inch (5.08mm) drop at tip. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8620170 | MP902-60FX | Absolute shielded flexible metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.20 (5.08mm)" drop with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm). |
| U8620426 | MP903-50-1-3M | Right angle metal shaft surface probe, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop at tip. Operating frequency 1MHz -3MHz, microdot connector, absolute bridge coil configuration. |
| U8620184 | MP905-120 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 12" (305mm). |
| U8620186 | MP905-30 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 3" (76mm). |
| U8616185 | MP905-30-1-3M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.50 inch (12.7mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 3 inches (76mm). |
| U8610514 | MP905-30-200K-1M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 200kHz-1MHz frequency range and has a center frequency of 500kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 3" (76mm). |
| U8620188 | MP905-40 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm). |
| U8620189 | MP905-40-1-3M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 4" (102mm). |
| U8610515 | MP905-40B | Absolute shielded metal shaft microdot detachable pencil probe with bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50 inch (12.7mm) drop with a 0.125 inch (3.18mm) diameter tip. Total length of 4 inches (102mm). |
| U8620193 | MP905-45-200K-1M | |
| U8620196 | MP905-50 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 5" (127mm). |
| U8620197 | MP905-50-1-3M | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 5" (127mm). |
| U8610516 | MP905-50-200K-1M | |
| U8620198 | MP905-50B | Absolute shielded metal shaft microdot detachable pencil probe bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50 inch (12.7mm) drop with a 0.125 inc (3.18mm) diameter tip. Total length of 5 inches (127mm). |
| U8610859 | MP905-50B-1-3M | Absolute shielded "bent" metal shaft microdot detachable pencil probe. Operates on a 1MHz-3MHz frequency range and has a center frequency of 2MHz. Right angle shaft with a 0.50 inch (12.7mm) drop and a total length of 5 inches (12.7cm). |
| U8620199 | MP905-50FX | |
| U8620200 | MP905-60 | Surface Probe, 50 kHz to 500 kHz, 200 kHz center frequency, Right Angle Shaft, 0.50 in. (12.7 mm) Drop, 0.125 in. (3.18mm) tip diameter, 152 mm (6 in.) length, Microdot Connector |
| U8610518 | MP905-60-200K-1M | Surface Probe, detachable metal right angle shaft, 200 kHz - 1 MHz frequency range, 500 kHz center frequency, 0.50 in. (12.7 mm) drop, 152 mm (6 in.) overall length, Mircodot Connector |
| U8620203 | MP905-60B | Absolute shielded metal shaft microdot detachable pencil probe bent handle. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 6" (152mm). |
| U8620337 | MP905-70 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 7" (178mm). |
| U8620209 | MP905-80 | Absolute shielded metal shaft microdot detachable pencil probe. Operates on a 50kHz-500kHz frequency range and has a center frequency of 200kHz. Right angle shaft with a 0.50" (12.7mm) drop with a 0.125" (3.18mm) diameter tip. Total length of 8" (203mm). |
| U8620427 | MP907-60 | Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.7 inch (17.7mm) drop at tip. Operating frequency 50kHz -500kHz, microdot connector, absolute bridge coil configuration. |
| U8620224 | MT-30-50K | Straight metal shaft surface probe, 3 inch (7.6cm) overall length with 0.187 inch (4.7mm) diameter shaft. Operating frequency 50kHz, triax Fischer/Lemo connector, bridge coil configuration. |
| U8623035 | MTF-30 | Surface Probe, Straight, 3" L. Shlded |
| U8623036 | MTF-30-1-6M | 2 MHz Surface Probe |
| U8623362 | MTF302-60 | |
| U8623251 | MTF305-30 | 30 degree angle metal shaft shielded probe, Triaxial Fischer connector, 1/8" (3.1mm) diameter X 3" (76.2mm) long with a 1/2" (12.6mm) drop at the probe tip. Operating frequency of 50 KHz-500 KHz. |
| U8610529 | MTF305-40 | 30 degree angle metal shaft shielded probe, Triaxial Fischer connector, 1/8" (3.1mm) diameter X 4" (101.5mm) long with a 1/2" (12.6mm) drop at the probe tip. Operating frequency of 50 KHz-500 KHz. |
| U8623338 | MTF305-60 | Thirty degree angle metal shaft surface probe, 6 inch overall length with 0.5 inch drop at tip. Operating frequency 50KHz -500KHz, Fischer/Lemo triax connector, bridge coil configuration. |
| U8623038 | MTF-40 | Surface Probe, 50 kHz to 500 kHz, Straight Probe, 101 mm (4in.) length, Triax Fischer/LEMO Connector |
| U8623039 | MTF-40-1-6M | Surface Probe, 1 MHz - 6 MHz, 2 MHz, Straight Probe, 101 mm (4 in.) length, Triax Fischer/LEMO Connector |
| U8629752 | MTF-40FX-1-6M | |
| U8610530 | MTF453-30 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.30 inch drop and a total length of 3.0 inches. |
| U8623045 | MTF453-40 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.30 inch drop and a total length of 4.0 inches. |
| U8620274 | MTF455-30 | HFEC Surface Probe, 45 Deg .50 Drop Bridge 50-500KHZ Frequency |
| U8623050 | MTF455-40 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Forty-five degree angle shaft with a 0.50 inch drop and a total length of 4.0 inches. |
| U8623313 | MTF-50-1-6M | Straight metal shaft surface probe, 5 inch (12.7cm) overall length. Operating frequency 1MHz -6MHz, triax Fischer/Lemo connector, bridge coil configuration. |
| U8623060 | MTF-60-1-6M | Straight metal shaft surface probe, 6 inch (15.2cm) overall length. Operating frequency 1MHz -6MHz, triax Fischer/Lemo connector, bridge coil configuration. |
| U8623065 | MTF9002-70FX | Triax Fischer/Lemo detachable "flexible" metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.02 inch drop and a total length of 7.0 inches. |
| U8250091 | MTF9003-50FX | Triax Fischer/Lemo detachable Flexible metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.03 inch drop and a total length of 5.0 inches. |
| U8623070 | MTF9003-60 | Surface Probe, 50 kHz to 500 kHz, Right Angle Shaft 0.03 in. (0.76 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector |
| U8610773 | MTF9003-60-1-6M | Bridge Absolute shielded metal shaft Triax Lemo/Fischer detachable pencil probe. Operates on a 1MHz-6MHz frequency range. Right Angle Shaft, 0.03in. (0.76mm) drop with a 0.125" diameter tip. 6 inch overall length. |
| U8623071 | MTF9003-60FX | Right angle flexible metal shaft surface probe, 6 inch (15.2cm) overall length with 0.03 inch (0.76mm) drop at tip. Operating frequency 50kHz -500kHz, triax Fischer/Lemo connector, bridge coil configuration. |
| U8610540 | MTF9010-50FX | |
| U8610711 | MTF901-50 | Right angle metal shaft surface probe, 5 inch overall length with 0.1 inch drop at tip. Operating frequency 50KHz - 500KHz, Fischer/Lemo triax connector, bridge coil configuration. |
| U8623074 | MTF901-60 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.10 inch drop and a total length of 6.0 inches. |
| U8623081 | MTF902-50 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.20 inch drop and a total length of 5.0 inches. |
| U8623083 | MTF902-60 | Surface Probe, 50 kHz to 500 kHz, Right Angle Shaft, 0.20 in. (5.08 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector |
| U8623084 | MTF902-60-1-6M | Surface Probe, 1 MHz to 6 MHz, Right Angle Shaft, 0.20 in. (5.08 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector |
| U8623086 | MTF902-60B | Triax Fischer/Lemo detachable "bent" metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.20 inch drop and a total length of 6.0 inches. |
| U8623326 | MTF903-45-1-6M | |
| U8600960 | MTF903-50B-1-6M | Right angle bent metal shaft surface probe, 5 inch (12.7cm) overall length with 0.3 inch (7.6mm) drop at tip. Operating frequency 1MHz -6MHz, triax Fischer/Lemo connector, bridge coil configuration. |
| U8623106 | MTF905-50 | Triax Fischer/Lemo detachable metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.50 inch drop and a total length of 5.0 inches. |
| U8620272 | MTF905-50-1-6M | Right angle metal shaft surface probe, 5 inch (12.7cm) overall length with 0.5 inch (12.7mm) drop at tip. Operating frequency 1MHz -6MHz, triax Fischer/Lemo connector, bridge coil configuration. |
| U8623108 | MTF905-60 | Surface Probe, 50 kHz to 500 kHz, Right Angle Shaft, 0.50 in. (12.7 mm) Drop, 152 mm (6 in.) length, Triax Fischer/LEMO Connector |
| U8623113 | MTF905-60FX | Triax Fischer/Lemo detachable "flexible" metal shaft pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.50 inch drop and a total length of 6.0 inches. |
| U8610973 | MTF905-60FX-1-6M | |
| U8623263 | MTF905-60FX-200K-1M | |
| U8623131 | MXTF-40 | Absolute shielded metal shaft Triax Fischer/Lemo detachable pencil probe. Operates on a 50kHz - 500kHZ frequency range and has a center frequency of 200kHz. Straight shaft with 0.050 inch (12.7mm) diameter tip. Total length of 4 inches (10.2cm). |
| U8623134 | MXTF902-40B | Triax Fischer/Lemo detachable metal shaft "bent" pencil probe. Operates on a 50KHz - 500KHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.2 inch drop and a 0.050 inch diameter tip. Total length of 4.0 inches. |
| Q2500219 | MZTF-40 | |
| U8623368 | MZTF905-60 | Right angle metal shaft surface probe, 6 inch (15.2cm) overall length with 0.5 inch (12.7mm) drop and 0.062 (1.57mm) diameter at tip. Operating frequency 50kHz -500kHz, triax Fischer/Lemo connector, bridge coil configuration. |
| U8860784 | NDT1087-P1 | |
| U8862446 | NDT3141G1 | |
| U8630015 | NEC-1005 | |
| U8680002 | NEC-1006 | Special Purpose Eddy Current Probe lap joint inspection |
| U8610552 | NEC-1016-1 | Special purpose right angle eddy current probe, bridge coil configuration operating with a frequency range of 25kHz-100kHz, triax Fischer/Lemo connector. |
| U8610556 | NEC-1058 | Surface Probe |
| U8633002 | NEC-1059 | Low Frequency Probe, |
| U8610403 | NEC-1062 | Special purpose right angle metal shaft surface probe, 8 inch (20.3cm) overall length with 0.25 inch (6.3mm) drop at tip. Operating frequency 25kHz -200kHz, triax Fischer/LEMO connector, bridge coil configuration. |
| U8861313 | NEC-1062G | MP Probe Guide L&R Side. |
| U8610558 | NEC-1083 | Special Purpose Eddy Current Probe |
| U8680003 | NEC-1084 | Special Purpose Eddy Current Probe |
| U8630018 | NEC-1087 | Special purpose right angle spot probe. 0.25 inch diameter (6.3mm), aluminum balanced reflection coil configuration, triax Fischer/LEMO connector. |
| U8610561 | NEC-1089 | Special Purpose Eddy Current Probe |
| U8633062 | NEC-1108 | Special purpose chem. mill sliding probe. Reflection coil configuration, triax Fischer/Lemo connector. Operating frequency range 1KHz-50KHz. |
| U8610744 | NEC-2017 | |
| U8680089 | NEC-2052 | Special purpose eddy current surface probe, right angle metal shaft probe, 11 inches overall length with 0.05 inch drop at tip. Triax Fischer/ Lemo connector, bridge coil configuration with operating frequency of 50KHz-500KHz. |
| U8610570 | NEC-2078 | Special Purpose Probe, Equiv to 2-832-02-2455 |
| U8629544 | NEC-2236-TF | |
| U8600304 | NEC-3006 | |
| U8600305 | NEC-3007 | |
| U8600079 | NEC-3014 | |
| U8600080 | NEC-3015 | |
| U8600081 | NEC-3016 | |
| U8600307 | NEC-3035 | |
| U8600309 | NEC-3036 | |
| U8629069 | NEC-3039 | |
| U8600083 | NEC-3078-.73-.79 | |
| U8600328 | NEC-3129-48-56 | Special purpose manual bolt hole probe ("Y"? style), 1 MHz to 3 MHz, 4 Pin Fischer connector, 0.750 Inch (19.05mm) to 0.875 (22.23mm). |
| U8600329 | NEC-3129-56-64 | Special purpose manual bolt hole probe ("Y"? style), 1 MHz to 3 MHz, 4 Pin Fischer connector, 0.875 Inch (22.23mm) to 1.00 (25.40mm). |
| U8600330 | NEC-3129-EXT | Special Purpose Eddy Current Probe |
| U8636056 | NEC-4028-2 | Ring probe, 0.5 inch (12.7mm) ID X 1.0 inch (25.4mm) OD. Reflection oil configuration, triax Fischer/LEMO connector. |
| U8636081 | NEC-4028-3 | |
| U8630029 | NEC-4031 | Low frequency surface/spot probe, reflection coil configuration operating between 800Hz-30KHz, 4 pin Fischer connector. |
| U8634085 | NEC-4033-TF | Special purpose eddy current spot probe. 0.62 inch (15.7mm) diameter X 1.6 inch (4.06cm) tall. Reflection coil configuration operating at 1-30kHz, right angle triax Fischer/LEMO connector. |
| U8636053 | NEC-4039 | Reflection Sliding Probe, Fixed, 1 kHz - 100 kHz, 25.4 mm (1.00 in.) x 38.1 mm (1.50 in.) x 20.3 mm (0.80 in.), Fischer/LEMO Triax Connector |
| U8633021 | NEC-4083 | Low Frequency Probe |
| U8630017 | NEC-4088-1 | Special Purpose Low Frequency Probe |
| U8639004 | NEC-4170 | Low Frequency Probe |
| U8670016 | NEC-8196 | |
| U8670018 | NEC-8196L | |
| U8670135 | NEC-8196-TF | |
| U8779469 | OMNI-A-OBTC | Bond Testing C-Scan Adaption kit for OmniScan ECT/ECA includes MXB software and adaptor for Pitch-Catch BondMaster probe |
| U8767054 | RAU-RA | Bolt hole probe adaptor, universal probe (4 pin Fischer) to Rechii RA probe (4 pin LEMO). |
| U8767055 | RAU-U-12FX | Flex shaft scanner extension, universal probe (4 pin Fischer) to Spitfire or MiniMite Fischer scanner (4 pin Fischer). 12 inch (30.4cm) long. |
| U8634002 | RR0110-1-TF | Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.50 inch (12.7mm) ID X 1.09 inch (27.6mm) OD |
| U8636011 | RR0110-5-TF | Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.50 inch (12.7mm) ID X 1.00 inch (25.4mm) OD |
| U8636012 | RR0111-1-TF | Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.53 inch (13.4mm) ID X 1.10 inch (27.9mm) OD |
| U8636016 | RR0112-2 | Reflection Ring Probe, 2-pin microdot connector, operating frequency 50Hz-3KHZ, 0.60 inch (15.23mm) ID X 1.25 inch (31.75mm) OD |
| U8636018 | RR0112-5-TF | Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.60 inch (15.23mm) ID X 1.16 inch (29.46mm) OD |
| U8636026 | RR017-1-TF | |
| U8636027 | RR018-5-TF | Reflection Ring Probe, triax fischer/lemo connector, operating frequency 50Hz-3KHZ, 0.40 (10.16mm) ID X .80 inch (20.32mm) OD |
| U8636031 | RR019-5-TF | Reflection Ring Probe, triax fischer/lemo connector, operating frequency 80Hz-4KHz, 0.450 inch (11.43mm) ID X 0.900 inch (22.86mm) OD |
| U8629109 | RR026-1 | |
| U8636039 | RR058-1 | Reflection Ring Probe, 2-pin microdot connector, operating frequeny 200Hz-10KHz, 0.300 inch (7.61mm) ID x 0.815 inch (20.7mm) OD |
| U8636040 | RR058-1-TF | Reflection Ring Probe, triax fischer/lemo connector, operating frequeny 200Hz-10KHz, 0.300 inch (7.61mm) ID x 0.815 inch (20.7mm) OD |
| U8636100 | RR2007-1 | |
| Q6360011 | RR207-1 | |
| U8630024 | RS1005-2-TF | Corrosion Probe, TF Conn. |
| U8634026 | RS1005-5-TF | Low Frequency Probe, triax fischer |
| U8634137 | RS204-2-TF | Spot probe, 0.425 inch (10.8mm) diameter. Operating frequency 500Hz -15kHz, triax Fischer/Lemo connector, reflection coil configuration. |
| U8270003 | SAA-112-005-032 | ECA Semi-Rigid probe, TX-RX mode, 112 mm coverage, 1 - 25 kHz, 32 elements, 3-m cable. |
| U8270004 | SAAR-051-100-032 | ECA Rigid probe, TX-RX mode, 51.2 mm coverage, 20 - 500 kHz, 32 elements, 3-m cable. |
| U8270093 | SAB-064-030-032 | ECA Semi-Rigid probe for subsurface crack detection, TX-RX mode double resolution, 64 mm coverage, 4 kHz to 225 kHz, 32 elements, 2.4 m cable, with ENC1-K-ECA encoder mounted |
| U8270006 | SAB-067-005-032 | ECA Semi-Rigid probe, TX-RX mode double resolution, 67.2 mm coverage, 1 - 25 kHz, 32 elements, 3-m cable |
| U8270163 | SAB067-ENC | ECA Semi-Rigid probe, shielded TX-RX mode double resolution, 67.2 mm coverage, 1 - 25 kHz, 32 elements, 3m cable. This is a factory-assembled probe kit, ready to use, consisting of a SAB-067-005-032, and ENC1-K-ECA encoder |
| U8270008 | SBB-051-150-032 | ECA Semi-Rigid probe, ABS mode, 51.2 mm coverage, 50 - 500 kHz, 32 elements, 3-m cable. |
| Q2500841 | SBBR026-ENC | |
| U8609344 | SEU-10.2-35 | |
| U8609345 | SEU-10.3-35 | Universal Rotary Hole Probe 10.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609347 | SEU-11.0-35 | |
| U8609350 | SEU-11.4-35 | Universal Rotary Hole Probe 11.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609353 | SEU-11.8-35 | |
| U8609354 | SEU-11.9-35 | Universal Rotary Hole Probe 11.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609355 | SEU-12.3-35 | Universal Rotary Hole Probe 12.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8602084 | SEU-12.6-35 | Universal Rotary Hole Probe 12.6mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609356 | SEU-12.7-35 | Universal Rotary Hole Probe 12.7mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| Q6090037 | SEU-13.5-50 | Universal Rotary Hole Probe 13.5mm diameter, Stainless Steel fixed diameter with 50mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609369 | SEU-13.9-35 | Universal Rotary Hole Probe 13.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8602087 | SEU-14.2-35 | |
| U8602090 | SEU-15.8-35 | |
| U8609363 | SEU-15.9-35 | |
| U8609372 | SEU-17.5-35 | |
| U8609374 | SEU-18.3-35 | |
| U8609376 | SEU-19.1-35 | |
| U8609380 | SEU-20.6-35 | |
| U8609392 | SEU-25.4-35 | |
| U8602076 | SEU-3.0-35 | Universal Rotary Hole Probe 3.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609315 | SEU-3.1-35 | Universal Rotary Hole Probe 3.1mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| Q6000004 | SEU-3.2-35 | |
| U8609316 | SEU-3.5-35 | Universal Rotary Hole Probe 3.5mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8602077 | SEU-3.6-35 | Universal Rotary Hole Probe 3.6mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609317 | SEU-3.9-35 | Universal Rotary Hole Probe 3.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| Q6020035 | SEU-4.0-35 | Universal Rotary Hole Probe 4.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8602078 | SEU-4.2-35 | Universal Rotary Hole Probe 4.2mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609318 | SEU-4.3-35 | Universal Rotary Hole Probe 4.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| Q2501117 | SEU-4.5-35 | |
| U8609319 | SEU-4.7-35 | Universal Rotary Hole Probe 4.7mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609320 | SEU-5.0-35 | Universal Rotary Hole Probe 5.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609321 | SEU-5.1-35 | Universal Rotary Hole Probe 5.1mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609322 | SEU-5.4-35 | Universal Rotary Hole Probe 5.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8602079 | SEU-5.6-35 | |
| U8609325 | SEU-5.9-35 | Universal Rotary Hole Probe 5.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8602080 | SEU-6.0-35 | |
| U8609326 | SEU-6.2-35 | Universal Rotary Hole Probe 6.2mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609327 | SEU-6.3-35 | Universal Rotary Hole Probe 6.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8602081 | SEU-6.4-35 | Universal Rotary Hole Probe 6.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609328 | SEU-6.6-35 | Universal Rotary Hole Probe 6.6mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609329 | SEU-6.7-35 | Universal Rotary Hole Probe 6.7mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609330 | SEU-7.0-35 | Universal Rotary Hole Probe 7.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609331 | SEU-7.1-35 | Universal Rotary Hole Probe 7.1mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609333 | SEU-7.8-35 | Universal Rotary Hole Probe 7.8mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609334 | SEU-7.9-35 | Universal Rotary Hole Probe 7.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| Q6090023 | SEU-7.9-51 | Universal Rotary Hole Probe 7.9mm diameter, Stainless Steel fixed diameter with 50mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609335 | SEU-8.2-35 | Universal Rotary Hole Probe 8.2mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609336 | SEU-8.3-35 | Universal Rotary Hole Probe 8.3mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609337 | SEU-8.6-35 | |
| U8602082 | SEU-9.0-35 | Universal Rotary Hole Probe 9.0mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609340 | SEU-9.4-35 | Universal Rotary Hole Probe 9.4mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609341 | SEU-9.5-35 | Universal Rotary Hole Probe 9.5mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609342 | SEU-9.8-35 | Universal Rotary Hole Probe 9.8mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8609343 | SEU-9.9-35 | Universal Rotary Hole Probe 9.9mm diameter, Stainless Steel fixed diameter with 35mm working length. Operating frequency 200KHz - 3MHz, Fischer 4 pin connector, reflection differential coil configuration. |
| U8250168 | SNG375-2.5L-10K-TF | Spring loaded surface spot probe, 10 khz, Triax Fischer/LEMO connector - Bridge coil configuration. |
| U8634136 | SNG375-3L-25K-TF | Spring loaded surface/spot probe, 25KHz, triax Fischer/Lemo connector. |
| U8629541 | SPO-4376L | SPO-4376L Weld Probe, PowerLink Standard Bridge Detachable Weld Probe, 100 kHz - 1 MHz, Straight, 8.3 mm ( 0.330 in.) Tip Diameter, Overall length 82.5 mm (3.25 in.), 7 Pin LEMO connector. |
| Q6020005 | SPO-5376 | Special purpose rotary scanner probe for flat bottom hole inspection. 0.250 inch (3.3mm) diameter, reflection differential coil configuration, 4 pin Fischer connector. |
| U8629963 | SPO-6464 | |
| U8800538 | SPO-6687 | SPO-6687 Cable, reflection coil configuration probes with triax Fischer/Lemo connector to N600, N500, N1000 or N2000 instrument (16 pin LEMO), 6 ft |
| U8626147 | SPO-7118 | |
| Q6000035 | SPO-7188 12.7 mm | SPO-7188 12.7 mm probe only |
| Q6400015 | SPO-7261 | |
| Q2500346 | SPO-7264 | Special purpose wheel probe for Alcoa, GA88351M Rim Flange. |
| Q2500354 | SPO-7265 | Special purpose wheel probe for Alcoa, GA88651M, Catear. |
| U8600481 | SUB-10-12 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.156 in. (3.97 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600482 | SUB-12-14 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.187 in. (4.76 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600483 | SUB-14-16 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.218 in. (5.56 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600484 | SUB-16-18 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.250 in. (6.35 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600485 | SUB-18-20 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.281 in. (7.14 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600486 | SUB-20-24 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.312 in. (7.94 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600487 | SUB-24-28 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.375 in. (9.52 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600488 | SUB-28-32 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.437 in. (11.11 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600490 | SUB-36-40 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.562 in. (14.29 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz -3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600491 | SUB-40-44 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.625 in. (15.88 mm) diameter, Self Expanding 2 in. (50.8 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8600494 | SUB-8-10 | Self-adjusting, Universal with "Bell" backshell Rotary Hole Probe 0.125 in. (3.18 mm) diameter, Self Expanding 1.75 in. (44.4 mm) working length. Operating frequency 200 kHz - 3 MHz, Fischer 4 Pin connector, reflection differential coil configuration. |
| U8670107 | SUBK-8-44 | |
| Q2800630 | TEA-082-600-N20 | |
| Q2800349 | TEA-100-015-N15 | Bobbin Probe, Attached, 10 mm (0.394 in.), 3-30 kHz, 15 m (49.2 ft.) cable |
| U8281753 | TEA-102-600-N20 | Bobbin Probe, Attached, 10.2 mm (0.402 in.), 120-1200 kHz, 20 m (65.6 ft.) cable |
| Q2800317 | TEA-112-050-N30 | Bobbin Probe, Attached, 11.2 mm (0.441 in.), 10-100 kHz, 30 m (98.4 ft.) cable |
| U8280768 | TEA-120-250-N15 | Bobbin Probe, Attached, 12 mm (0.472 in.), 50-500 kHz, 15 m (49.2 ft.) cable |
| U8281344 | TEA-124-050-N20 | Bobbin Probe, Attached, 12.4 mm (0.488 in.), 10-100 kHz, 20 m (65.6 ft.) cable |
| Q2800647 | TEA-130-015-N15 | |
| U8280933 | TEA-136-050-N20 | Bobbin Probe, Attached, 13.6 mm (0.535 in.), 10-100 kHz, 20 m (65.6 ft.) cable |
| U8665001 | TEA-140-050-N15 | Bobbin Probe, Attached, 14 mm (0.551 in.), 10-100 kHz, 15 m (49.2 ft.) cable |
| U8280447 | TEA-140-050-N20 | Bobbin Probe, Attached, 14 mm (0.551 in.), 10-100 kHz, 20 m (65.6 ft.) cable |
| U8281740 | TEA-144-050-N15 | Bobbin Probe, Attached, 14.4 mm (0.567 in.), 10-100 kHz, 15 m (49.2 ft.) cable |
| U8282109 | TEA-148-015-N05 | Bobbin Probe, Attached, 14.8 mm (0.583 in.), 3-30 kHz, 5m cable |
| Q2800318 | TEA-148-050-N30 | Bobbin Probe, Attached, 14.8 mm (0.583 in.), 10-100 kHz, 30 m (98.4 ft.) cable |
| U8280625 | TEA-158-015-N20 | Bobbin Probe, Attached, 15.8 mm (0.622 in.), 3-30 kHz, 20 m (65.6 ft.) cable |
| U8281176 | TEA-158-100-N20 | Bobbin Probe, Attached, 15.8 mm (0.622 in.), 20-200 kHz, 20 m (65.6 ft.) cable |
| U8280820 | TEA-160-015-N15 | Bobbin Probe, Attached, 16 mm (0.63 in.), 3-30 kHz, 15 m (49.2 ft.) cable |
| U8282065 | TEA-164-250-N20 | Bobbin Probe, Attached, 16.4 mm (0.646 in.), 50-500 kHz, 20 m (65.6 ft.) cable |
| U8281086 | TEA-170-050-N30 | Bobbin Probe, Attached, 17 mm (0.669 in.), 10-100 kHz, 30 m (98.4 ft.) cable |
| U8281064 | TEA-170-250-N20 | Bobbin Probe, Attached, 17 mm (0.669 in.), 50-500 kHz, 20 m (65.6 ft.) cable |
| Q2800596 | TEA-176-300-N15 | |
| Q2800082 | TEA-182-015-N20 | Bobbin Probe, Attached, 18.2 mm (0.717 in.), 3-30 kHz, 20 m (65.6 ft.) cable |
| U8281752 | TEA-184-050-N20 | Bobbin Probe, Attached, 18.4 mm (0.724 in.), 10-100 kHz, 20 m (65.6 ft.) cable |
| U8280651 | TEA-188-030-N15 | Bobbin Probe, Attached, 18.8 mm (0.74 in.), 6-60 kHz, 15 m (49.2 ft.) cable |
| U8280452 | TEA-188-050-N20 | Bobbin Probe, Attached, 18.8 mm (0.74 in.), 10-100 kHz, 20 m (65.6 ft.) cable |
| U8280223 | TEA-190-050-N15 | Bobbin Probe, Attached, 19 mm (0.748 in.), 10-100 kHz, 15 m (49.2 ft.) cable |
| U8281166 | TEA-194-050-N20 | Bobbin Probe, Attached, 19.4 mm (0.764 in.), 10-100 kHz, 20 m (65.6 ft.) cable |
| Q2800308 | TEA-198-015-N30 | Bobbin Probe, Attached, 19.8 mm (0.78 in.), 3-30 kHz, 30 m (98.4 ft.) cable |
| Q2800321 | TEA-224-600-N30 | Bobbin Probe, Attached, 22.4 mm (0.882 in.), 120-1200 kHz, 30 m (98.4 ft.) cable |
| U8280627 | TEA-228-600-N20 | Bobbin Probe, Attached, 22.8 mm (0.898 in.), 120-1200 kHz, 20 m (65.6 ft.) cable |
| U8281091 | TEA-230-050-N30 | Bobbin Probe, Attached, 23 mm (0.906 in.), 10-100 kHz, 30 m (98.4 ft.) cable |
| U8282059 | TEA-236-015-N20 | Bobbin Probe, Attached, 23.6 mm (0.929 in.), 3-30 kHz, 20 m (65.6 ft.) cable |
| Q2800319 | TEA-236-015-N30 | Bobbin Probe, Attached, 23.6 mm (0.929 in.), 3-30 kHz, 30 m (98.4 ft.) cable |
| U8280850 | TEA-304-050-N30 | Bobbin Probe, Attached, 30.4 mm (1.197 in.), 10-100 kHz, 30 m (98.4 ft.) cable |
| U8281555 | TEA-314-050-N20 | Bobbin Probe, Attached, 31.4 mm (1.236 in.), 10-100 kHz, 20 m (65.6 ft.) cable |
| U8281880 | TEA-328-015-N20 | Bobbin Probe, Attached, 40 mm (1.575 in.), 3-30 kHz, 20 m (65.6 ft.) cable |
| Q2800548 | TEB-140-010 | Bobbin Probe, Detachable, 14 mm (0.551 in.), 2-20 kHz |
| U8280566 | TEB-140-050 | Bobbin Probe, Detachable, 14 mm (0.551 in.), 10-100 kHz |
| Q2800412 | TEB-166-050 | Bobbin Probe, Detachable, 16.6 mm (0.654 in.), 10-100 kHz |
| Q2800413 | TEB-166-250 | Bobbin Probe, Detachable, 16.6 mm (0.654 in.), 50-500 kHz |
| U8281703 | TEB-176-050 | Bobbin Probe, Detachable, 17.6 mm (0.693 in.), 10-100 kHz |
| U8281102 | TEB-188-030 | Bobbin Probe, Detachable, 18.8 mm (0.74 in.), 6-60 kHz |
| U8281934 | TED-162-015 | Air Conditioner Probe, Detachable, 16.2 mm (0.638 in.), 3-30 kHz |
| Q2800111 | TEE-102-600-N20 | Titanium Probe, Attached, 10.2 mm (0.402 in.), 120-1200 kHz, 20 m (65.6 ft.) cable |
| Q2800640 | TEG-154-050-N25 | |
| U8282061 | TEK-180-250-N20 | High Resolution Probe, Attached, 18 mm (0.709 in.), 50-500 kHz, 20 m (65.6 ft.) cable |
| Q2800667 | TEK-326-250-N20 | |
| U8800531 | TEZ-ACS-N15 | Detachable cable for bobbin AC probes, 15 m (49.2 ft.) |
| U8800031 | TEZ-BBK-N15 | Kink-resistant detachable cable for bobbin ECT probes, 15 m (49.2 ft.) |
| U8800498 | TEZ-BBK-N20 | Kink-resistant detachable cable for bobbin ECT probes, 20 m (65.6 ft.) |
| U8779159 | TFTAPE-0.50 | Teflon Tape 1/2 in. Width |
| U8779160 | TFTAPE-0.75 | Teflon Tape 3/4 in. Width |
| U8779701 | TFTAPE-1.25 | Teflon Tape 1.25 inch (31.7mm) width X 18 yards (16.4M) long. |
| U8779077 | TFTAPE-2.00 | |
| Q2800322 | TRX-220-300-N30 | RFT Dual Exciter Probe, 22 mm (0.866 in.), 300 Hz, 30 m (98.4 ft.) cable |
| U8281505 | TXE-R8-138-MF-N20 | Eddy Current Array Tube Probe for circ cracks detection in Stainless Steel, 8 coils array, Attached, 13.8 mm (0.543 in.), Medium Frequency range, 20 m (65.6 ft.) cable |
| Q2800547 | TXE-R8-198-MF-N20 | Eddy Current Array Tube Probe for circ cracks detection in Stainless Steel, 8 coils array, Attached, 19.8 mm (0.78 in.), Medium Frequency range, 20 m (65.6 ft.) cable |
| U8610876 | UMP902-60-200K-1M | Absolute unshielded metal shaft microdot detachable pencil probe. Operates on a 200K-1MHz frequency range and has a center frequency of 200KHz. Right angle shaft with a 0.20" (5.08mm) drop with a 0.125" (3.18mm) (3.18mm) diameter tip. Total length of 6" (152mm). |
| U8610608 | UMTF-40 | Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 50kHz -500kHz, triax Fischer/Lemo connector, bridge unshielded coil configuration. |
| U8614274 | UMTF-40-1-6M | Straight metal shaft surface probe, 4 inch (10.1cm) overall length. Operating frequency 1MHz -6MHz, triax Fischer/Lemo connector, bridge unshielded coil configuration. |
| U8250323 | UMTF453-45-200K-1M | Bridge Absolute un-shielded metal shaft Triax Lemo/Fischer detachable pencil probe. Operates on a 200kHz-1MHz frequency range. Forty Five degree Shaft, 0.30in. (7.6 mm) drop with a 0.125" diameter tip. 4.5 inch (11.4cm) overall length |
| U8623361 | UMTF901-50 | Unshielded right angle metal shaft surface probe, 5 inch overall length with 0.1 inch drop at tip. Operating frequency 50KHz -500KHz, microdot connector, absolute coil configuration. |
| Q2500738 | UMTF9025-60FX | Right angle flexible metal shaft surface probe, 6 inch (15.2cm) overall length with 0.25 inch (6.3mm) drop. Operating frequency 50kHz -500kHz, triax Fischer/Lemo connector, unshielded bridge coil configuration. |
| U8623143 | UMTF902-60-200K-1M | 500KHz center frequency Surface Probe |
| U8620232 | UP-30 | Surface Probe |
| U8620237 | UP-80FX | Surface Probe |
| U8690018 | WLD-5-63 | Weld Surface Probe, 100 kHz to 600 kHz, Straight Probe, 5.0 mm (0.196 in.) tip diamter, 6.1 mm (2.4 in.) length, 4-pin LEMO Connector |
| U8690046 | WLD-5-63-TF | WLD-5-63-TF: Weld Probe, Standard Bridge Detachable Weld Probe, 100Khz-600 kHz, Straight, 5.0 mm ( 0.196 in.) Tip Diameter, Overall length 61.0 mm (2.4 in.), Triax Fischer/LEMO connector 61 mm |
| Q2500436 | WLD-5-63-TF-NFE | |
| U8690019 | WLD-8-55 | Weld Surface Probe, 100 kHz to 600 kHz, Straight Probe, 8.0 mm (0.314 in.) tip diamter, 5.5 mm (2.16 in.) length, 4-pin LEMO Connector |
| U8690022 | WLD90I-5-50 | |
| U8629542 | WLD90I-5-50-TF | WLD90I-5-50-TF: Weld Probe, Standard Bridge Detachable Weld Probe, 100 kHz - 600 kHz, Right Angle, 5.0 mm (0.196 in.) Tip Diameter, Overall length 50.0 mm (1.96 in.), Triax Fischer/LEMO connector. |
咨詢電話